Avoid problems in the cooling lines and extend the lifetime of your mould heater or chiller.
Contaminated fluid enters the inlet port where it is dispersed by the unique
tapered radial flow channels. Fluid passes down the outside of the centrally
mounted rare earth magnetic core which captures contamination particles
along its length, resulting in excellent filtration efficiency.
The geometry of the magnetic flux circuit means that contamination builds
up in a controlled way, ensuring that the filter can never block, irrespective
of how much contamination is held. Channels remain open allowing fluid to
continue to flow freely.
The filtered fluid flows through the return slots located in the upper section of
the magnetic core, down through the centre and exits through the outlet port.
Cleaning
Using the supplied cleaning tool, a fully contaminated core can be cleaned
in under 30 seconds. Only metallic particles are removed from the filter and
these can be easily disposed. There are no dirty cartridges!
Installation Location
Place on the cooling supply or return. On temperature control or chiller.
Benefits
- Sub-micron filtration
- Large holding capacity
- High intensity rare earth magnetic material
- No pressure loss - even if full
- Suitable for all machining applications
- Environmentally responsible
- No consumables
